Product Line

Click on Photo

Product Description

NEW !

Midstates-EWS now offers complete water testing capabilities with a lot of EPA proven equipment / procedures. A great set of cost effective tools for your water testing requirements.

MIDSTATES-EWS
FILTER PRESSES

MIDSTATES-EWS FILTER PRESSES

Midstates-EWS offers a complete line of Filter Presses ranging from 0.1 cu ft up to 600 cu ft to meet all of your filtration, process and dewatering needs.

PARKSON CORP.
IPC CLARIFIERS

PARKSON CORP. IPC CLARIFIERS

Compact continuous flow chemical precipitation Clarifier systems. This system has a wide GPM flow range of applications for waste water treatment. Commonly used for Micro—electronics, Petro Chemical, Printed Circuit Board Mfg, Metal Finishing, Plating, Industrial Laundries, and Landfill Leachate. Treatment flows from 2 GPM to 2000 GPM. Clarifier designs from one common tank source.

PARKSON CORP
GREAT LAKES
EOUIPMENT

PARKSON CORP GREAT LAKES EOUIPMENT

GLE Clarifiers and Oil/Water Separators, Inclined Plate Separators, Slant Rib Coalescing Separators 2 to 1200 GPM in single tank. Sludge Thickeners and Auger Systems for Sludge Transfers. Automatic Sludge Pump out systems.

ARO FLUID PRODUCTS INGERSOLL—RAND

Air operated diaphragm pumps up to 3” connection. Non—stalling air valve, no lubrication, no foaming or shearing of fluid material. Variable flow rates, positive priming, runs dry without damage. Bolt together construction, lightweight and portable. Chemical resistant for most applications of fluid movement

BRAWN MIXERS INC

Agitator mixers for blending, liquids, solid/liquid solutions and suspensions of gas/liquid reactions. Direct drive, gear drive reduction, air drive and variable speed applications. Prop and axial flow stabilized turbines are standard. Drum mixers and custom specialty application mixers. Side entry mixers for larger tanks.

CETCO RM10®

RM—1O Industrial Clay based flocculents for one step waste water treatments. Oils, grease, heavy metals, suspended solids, mop and scrubber water, paints, corrugated wastes and dye penetrants. This product enhances low pressure filtration ie: filter press and plate & frame filtration for higher dry cake solids to landfill.

CRANE
ENVIRONMENTAL EPRO Series Systems

CRANE ENVIRONMENTAL EPRO Series Systems

Industrial and Commercial Reverse Osmosis Systems 5OGPD to 500,000GPD High Purity Water Systems, Industrial Painting, Plating, Surgical, Pharmaceutical, Beverage Markets. Commercial ice, Food preparation, Metal Finishing and Pretreatment. Fully automatic units, Recycle and Double Pass Systems. Standard units produce < 1 TDS Total dissolved solids
EPRO Series Systems manufactured by Crane Environmental. 31,000 to 144,00 gallons per day

HYDRO, Inc

HP1200 SM manufactured by Hydro,inc.

Laboratory - Pharmaceutical - Industrial

Circulating Deionization
Reverse Osmosis System

Designed to meet
CAP/ASTM/NCCLS/USP standards
at your flow demands

SUPER SACS

Industrial hazardous waste containment bags for solid waste sludge and furnace flue dust. Low cost custom designs, with inlet/outlet openings. Standard feature can be moved by fork lift. UN/DOT certified and land-fill approved materials of construction. Eliminates drums.

ABANAKI OIL

Free oil removal from 1—200GPH. Works on oil, grease, coolants. Indoor tanks to outdoor pits for primary metal mills. Boom mast mount available. Portable 55 gallon drum models for light tramp oils. Stainless, Poly, fuzzy belts available. pH ranges 1-13 for all chemical applications. All drive units are industrial gear reducer types. The Oil Concentrator provides final phase separation. It increases the efficiency of the skimmer and reduces costs associated with oil disposal.

KLINKAU AMERICA

Polypropylene and PVDF filter press plates, 250MM — 1500MM recessed chamber plates, replaceable membranes, plate and frame, bolt on handles, spigots and port liners. Gasketed or non—gasketed plates available for most filter press manufacturers. Liner and feed pipe replacements.

LMI PUMPS

Electric chemical feed pumps .01 to 25.0 GPH and accessories. Environmental cabinet enclosures, stroke and speed control, 4—2OMA capable

WILDEN PUMPS

Double diaphragm pumps for sludges, liquids or chemical fluid movement. Self priming suction variable speed, variable pressure. Flows from 1 — 300 GPM available in 1/2” to 4” connections.

CAMAC

Pumps

Filtration

CAMAC

Corrosion—proof centrifugal pumps, filter systems, tube, sleeve, bag & cartridge. Chiller refrigeration systems, heat exchangers. Specializing in Metal Finishing, waste water and process filtration.

MDM Advance Pumps

General purpose centrifugal pumps. 1/4Hp to 3Hp ratings. Stainless, Viton, Carbon Graphite, Ceramic Seal and Viton combinations. Flows 5—150 GPM

Instruments-Controls

We offer a line of Controllers, Probes, Flowmeters and other instruments to complete your system. The depicted instrument is the ideal system for Monitoring and Control of pH /ORP.

CHEM—TAINER

Complete line of molded plastic tanks for waste treatment and process industries. Polyethylene, Polypropylene, Cross Linked P.E. and Molded PVDF tanks. Bulk storage up to 15,000 gallons installed fittings.

EDWARDS TANKS

Fiberglass tanks including vertical dome, cone bottom with legs and skirts. Horizontal on saddle, horizontal underground (single or double wall). Capacities from 50 gallon to over 40,000 gallons with maximum diameters of 12 feet.

GOODMAN CO

Filter cloths for all industrial filter press and plate and frame filters. Cloth media for any process wet or dry solids/fluid separation. Polypro perforated filter sheets, filter papers, bonded fabrics and felts.